MPF series filter cartridges are made of PTFE membrane. lt has excellent resistance to organic and inorganic chemical corrosion. The absolute filtration membrane ensures absolute filtration efficiency and is suitable for various high-demand occasions.

Features

• High flux, high efficiency
• Low initial pressure difference, large flow rate
• Good adsorption

Application

• Chemical reagents, high-purity reagents
• Terminal filtration of ink industry
• Solvent sterilization
• Corrosive liquid, strong oxidizing liquid sterilization and particle removal
• Terminal filtration of demanding particle removal

The cage, support layer and gaskets of MAPF series are all made of PTFE, giving it a perfluoro-like structure. lt is especially suitable for strong corrosive and high temperature liquid filtration.
MHAPF is made of modified hydrophilic PTFE. No need to pre-wetting.

Features

• PTFE membrane + PVDF shell make the filter element has a perfluorinated structure, which is more suitable for the filtration of strong corrosive acids and organic solvents
• Especially suitable for 49% HF filtration
• 100% Integrity Tested

Application

• Hydrofluoric acid, nitric acid, sulfuric acid, hydrochloric acid and other strong acid
• Various high temperature fluid over 100℃
• Various strong solvents such as chloroform, dimethyl, isopropanol, etc

is specially designed for the occasions with ultra-high flow requirements. It adopts a large diameter structure and a single opening type. The maximum filter area of a single filter element exceeds 8㎡, and the flow rate can reach 60m³/H.

Features

• The diameter 150mm and pleated technology to increase the filter area to 6㎡/20", achieve high flux and long life.
• The built-in pp frame is not easy to deform and can withstand greater pressure difference; the optimized double-layer dense polyester mesh cover has greater strength and stronger pressure resistance.
• The large flow design reduces the replacement frequency; the end mop design is convenient for replacement, and comprehensively saves manpower and time costs.
• PP (meltblown), PP (pleated), GF, PTFE membrane optional, andcan be used in wide application.

Application

• Water treatment, desalination, ionized water, water system
• Petrochemical, coal chemical, condensed water of various power plants
• Fluid filtration for large flow requirements such as salt water
• Resin

MCP is composed of bi-component fibers with different melting points. It adopts a unique curing technology to thermally fix the fibers, to form a rigid rigid matrix structure.

Features

• High strength and high pressure difference resistance.
• No fiber shifting or shedding, and the pore size is fixed to maintain a stable filtration efficiency.
• 1.0μm~150μm precision is optional.

Application

• High viscosity liquids: coatings, viscose, resins, etc.
• Replacement for Japanese CP series filter element

 

• High throughput, deodorization, decolorization, purification
• Cost-effective pre-filtration products
• 100% Integrity Tested

• Liquor adsorption, turbidity removal and filtration
• Water treatment essence, odor removal, decolorization, organic removal, etc.

 

• High pollution capacity
• Cost-effective, large flow rate

• Security filtration of reverse osmosis water treatment process
• Mineral water pre-filter
• Pre-filtration of various impurity removal filters